Jun margin of Medical Devices Co logo nursing beds, packaging and storage 7.1 mark; 7.1.1 Each multifunction apparent position appropriate care beds should be fixed plate, shall be marked on the nameplate; a) manufacturer's name, 7.1.2 Each product should be on the certificate, and the certificate; registration and production address b) the product name, specifications and model; c) production date and factory batch d) Registration No registered standard number; e) Contact There are the following; a) product name and company name; b) the implementation of standards, No; c) production date or batch number; external 7.2 Packaging 7.2.1 Each multifunctional nursing beds (large) packaging using corrugated packaging; 7.2. 2 products in addition to the box should have a sign outside 7.1.1 shall be marked: volume, number, and weight, "fear of pressure," "fear of rain," "afraid of the sun", "handle with care" and other signs should be consistent GB relevant provisions / T191-2008's. 7.3 Transportation packaged product can be general transportation, transportation should be noted anti-rain, snow, sun, transportation shall not be mixed with toxic and hazardous materials. 7.4 Storage wrapped multifunction care beds should be stored in a dry, well-ventilated room, surrounded by non-corrosive materials factory direct multi-functional stand up care beds, no heat. When operating nursing bed shampoo: Use rubber plug in the basin outlet plugged multifunction stand up care beds, shampoo aligned with threaded pipe drainage basin outlet Care beds out, forced insertion. The patient's head on the wash basin in the middle of the head rest area, injected into the basin of warm water, the water does not exceed the height of the head rest is appropriate to manually turn over care beds, this time to clean the head. Cleaning is completed, pull out the rubber plug, let go of dirty water. Wash basin with a drain pipe thread nursing beds for scalable use. Nursing beds | manual turning care beds | Jun Jun edge by edge medical care providers. Welcome to consult Hengshui monarch edge medical equipment Limited (www.hsjyyiliao.com/), be sure to specify when the contact is through the "Business Alliance members" see, thank you! Contact: Wang